BPDPH - 9544, HYDROCHLORIC ACID
- MSDS: BPDPH
- Manufacturer: J T BAKER INC
- Product Name: 9544, HYDROCHLORIC ACID
- National Stock Number: 6810-00N030081
Product Identification
Product ID:9544, HYDROCHLORIC ACID
MSDS Date:05/01/1989
FSC:6810
NIIN:00N030081
MSDS Number: BPDPH
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)
CAS: 7647-01-0
RTECS: MW4025000
Fraction By Weight: 33-40%
OSHA PEL 5 PPM, C
ACGIH TLV: 5 PPM, C
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 60-67%
Hazards
LD50 LC50 Mixture:LD50: (ORAL,RAB) 900 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: PULMONARY EDEMA,
CIRCULATORY FAILURE, RESPIRATORY SYSTEM DAMAGE, COLLAPSE, COUGHING,
DIFFICULT BREATHING. SKIN/EYE: SEVERE BURNS. INGEST: IS HARMFUL AND
MAY BE FATAL, SEVERE BURNS TO MOU TH, THROAT AND STOMACH, NAUSEA,
VOMITING. TARGET ORGANS: RESPIRATORY SYSTEM, EYES, SKIN. CHRONIC:
NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST: CALL MD. DO NOT INDUCE VOMITING. IF CONSCIOUS, GIVE
H*2O, MILK OR MILK OF MAGNESIA. INHAL: REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT,
GIVE O XYGEN. SKIN: IMMED FLUSH WITH PLENTY OFH*2O FOR AT LEAST 15
MIN WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. WASH CLOTHING
BEFORE RE-USE. EYE: IMMED FLUSH WITH PLENTY OF H*2O FOR AT LEAST 15
MIN.
Fire Fighting
Flash Point Method:CC
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
MOVE CNTNR FROM FIRE AREA IF IT CAN BE DONE WITHOUT RISK. USE H2O
TO KEEP FIRE-EXPOS CNTNRS (SUPP DATA)
Unusual Fire/Explosion Hazard:MAY EMIT HYDROGEN GAS UPON CONTACT WITH
METAL.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT CLTHG.
STOP LEAK IF YOU CAN DO SO WITHOUT RISK. VENT AREA. NEUTRALIZE
SPILL W/SODA ASH OR LIME. WITH CLEAN SHOVEL, CAREFULLY PLACE MATL
INTO CLEAN, DRY CNTNR & COVER; REMOVE FROM AREA. FLUSH SPILL AREA
W/H*20.
Neutralizing Agent:NEUT W/SODA ASH/LIME; JT BAKER NEUTRASORB OR TEAM
'LOW NA+' ACID NEUTRALIZERS.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN CORROSION-PROOF AREA. ISOLATE FROM INCOMPATIBLE MATERIALS. DO
NOT STORE NEAR OXIDIZING MATERIALS.
Other Precautions:DO NOT GET IN EYES, ON SKIN, ON CLOTHING. DO NOT
BREATHE VAPOR. LOOSEN CLOSURE CAUTIOUSLY. USE WITH ADEQUATE
VENTILATION. KEEP OUT OF REACH OF CHILDREN. MAY BE FATAL IF
SWALLOWED/INHALED. CAUSES SEVER E BURNS.
Exposure Controls
Respiratory Protection:RESP PROT REQUIRED IF AIRBORNE CONC EXCEEDS TLV.
AT CONC UP TO 100 PPM, A NIOSH/MSHA APPROVED CHEM CARTRIDGE RESP
W/ACID CARTRIDGE IS RECOMMENDED. ABOVE THIS LEVEL, A NIOSH/MSHA
APPROVED SCBA IS ADVIS ED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS. VENT HOOD.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:UNIFORM, PROTECTIVE SUIT, LAB COAT & APRON
EMERGENCY EYEWASH AND DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PH: 1.0 (O.1M SOLN). FIRE FIGHT PROC: COOL. DO NOT GET WATER INSIDE
CONTAINERS. MATLS TO AVOID: SULFATE, CALCIUM PHOSPHIDE,
FORMALDEHYDE, ALKALIES, CARBONATES, STRONG BASES, SULFURIC ACID,
CHLOROSULFO NIC ACID.
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:230F,110C
Melt/Freeze Pt:M.P/F.P Text:-13F,-25C
Vapor Density:1.3
Spec Gravity:1.19 (H2O=1)
pH:SUPDAT
Solubility in Water:COMPLETE (100%)
Appearance and Odor:CLEAR, COLORLESS FUMING LIQUID. PUNGENT ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
MOST COMMON METALS, H2O, AMINES, METAL OXIDES, ACETIC ANHYDRIDE,
PROPIOLACTONE, VINYL ACETATE, MERCURIC (SUPP DATA)
Stability Condition to Avoid:HEAT, MOISTURE.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, HYDROGEN, CHLORINE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.